JASIC EVO HRC-02 WIRELESS HAND REMOTE CONTROLLER MIG AND TIG

Jasic Evo 2.0 Wireless Handheld Amperage Control for MIG and TIG Welding (With Transceiver included.) 30mtr Range 

Suitable for the following JASIC EVO 2.0 machines; 
EM-160C, EM-200C, EM-200CT, EM-250CT, ET-200, ET-200P, ET-200P ACDC

This wireless control unit is a true multi functional piece and will work in two ways depending on the machine that you are using. While using this on the multi function MIG welding machines in the Jasic Evo 2.0 range it will adjust either the wire feed speed and voltage (if you are in the manual setting mode) or the welding current and welding voltage while in the synergic mode. 

For the TIG welding machines within the range there are 3 different levels of functionality based on the machine in use. For the DC non-pulsed machine it will adjust the welding current only. The DC pulse version will adjust both the current and pulse frequency. If you are using the AC TIG welder then this wireless control will adjust the welding current as well as the AC balance